What Needs To Be Inspected For Stamping Parts Processing
Mar 28, 2024
Leave a message
In the process of stainless steel processing, the 4# surface of one or both sides of the polished stainless steel sheet metal parts is ground with a grit abrasive material, so that the surface is a continuous line to form a HL surface, referred to as wire drawing. During the drawing process, different particle sizes produce different effects. The coarser the particle size, the stronger the metallic feeling, and the finer the particle size, the finer the product. In enterprises, typical standard samples can be made as references.
Flat wire drawing uses a flat sander to sanding the abrasive belt at a low speed, and the surface of the stainless steel is a continuous line, which is required by grains. After stainless steel processing, the stainless steel products are made of triangle wire drawing machine, and the abrasive belt is changed to a nylon belt. Graphite briquettes or briquettes are evenly pressed on the wire drawing machine to obtain a uniform drawing texture.
Send Inquiry



