How to adjust the cutting force in cnc millings?
Jun 27, 2025
Leave a message
Adjusting the cutting force in CNC millings is a crucial aspect of achieving high - quality machining results. As a trusted CNC Millings supplier, I have witnessed firsthand the impact that proper cutting force adjustment can have on the efficiency and precision of the CNC Milling Process. In this blog, I will share some valuable insights on how to adjust the cutting force effectively.
Understanding Cutting Force in CNC Millings
Before delving into the adjustment methods, it is essential to understand what cutting force is. Cutting force is the force exerted by the cutting tool on the workpiece during the machining process. It is composed of three main components: the tangential force, the radial force, and the axial force. The tangential force is responsible for the actual cutting action, while the radial and axial forces affect the stability of the cutting tool and the workpiece.
Several factors can influence the cutting force, including the cutting parameters (such as cutting speed, feed rate, and depth of cut), the properties of the workpiece material, the geometry of the cutting tool, and the cutting environment. By carefully controlling these factors, we can optimize the cutting force and improve the machining quality.
Adjusting Cutting Parameters
Cutting Speed
The cutting speed is the speed at which the cutting edge of the tool moves relative to the workpiece. Increasing the cutting speed generally reduces the cutting force. However, there is a limit to how much the cutting speed can be increased. If the cutting speed is too high, it can lead to excessive tool wear, poor surface finish, and even tool breakage. On the other hand, if the cutting speed is too low, the cutting force will increase, and the machining efficiency will decrease.
To adjust the cutting speed, we need to consider the type of workpiece material and the cutting tool. For example, when machining hard materials such as stainless steel, a lower cutting speed may be required compared to machining softer materials like aluminum. We can refer to the tool manufacturer's recommendations or use cutting speed calculators to determine the appropriate cutting speed.
Feed Rate
The feed rate is the distance the cutting tool advances into the workpiece per revolution or per tooth of the cutter. A higher feed rate increases the material removal rate but also increases the cutting force. Similar to the cutting speed, there is an optimal feed rate for each machining operation. If the feed rate is too high, it can cause excessive tool wear and poor surface finish. If the feed rate is too low, the machining time will be longer, and the cutting force may not be utilized effectively.


When adjusting the feed rate, we need to balance the material removal rate and the cutting force. We can start with a conservative feed rate and gradually increase it while monitoring the cutting force and the machining quality.
Depth of Cut
The depth of cut is the thickness of the layer of material removed by the cutting tool in a single pass. Increasing the depth of cut increases the cutting force significantly. Therefore, it is important to choose an appropriate depth of cut based on the workpiece material, the cutting tool, and the machine's power and rigidity.
In some cases, it may be better to make multiple passes with a smaller depth of cut rather than a single pass with a large depth of cut. This can help reduce the cutting force and improve the surface finish.
Selecting the Right Cutting Tool
The geometry and material of the cutting tool have a significant impact on the cutting force.
Tool Geometry
The tool geometry includes factors such as the rake angle, the clearance angle, and the cutting edge radius. A positive rake angle reduces the cutting force by making the cutting action more efficient. However, a very large positive rake angle can reduce the strength of the cutting edge, leading to tool breakage. The clearance angle is designed to prevent the tool from rubbing against the workpiece, which can increase the cutting force. A proper clearance angle ensures smooth cutting and reduces friction.
The cutting edge radius also affects the cutting force. A sharper cutting edge (smaller cutting edge radius) generally results in lower cutting force. However, a very sharp cutting edge may be more prone to wear.
Tool Material
The tool material should be selected based on the workpiece material. For example, carbide tools are suitable for machining hard materials due to their high hardness and wear resistance. High - speed steel (HSS) tools are more commonly used for machining softer materials. Different tool materials have different cutting performance, which can directly affect the cutting force.
Improving the Cutting Environment
Coolant and Lubrication
Using coolant and lubrication can significantly reduce the cutting force. Coolant helps to dissipate the heat generated during the cutting process, which can prevent the workpiece and the tool from overheating. Overheating can cause the material to harden, increasing the cutting force. Lubrication reduces the friction between the cutting tool and the workpiece, which also helps to lower the cutting force.
There are different types of coolants and lubricants available, such as water - based coolants, oil - based coolants, and dry lubricants. The choice of coolant and lubricant depends on the machining operation and the workpiece material.
Workpiece Fixturing
Proper workpiece fixturing is essential for reducing the cutting force. If the workpiece is not firmly held, it can vibrate during the machining process, which will increase the cutting force and affect the machining accuracy. We need to use appropriate fixtures and clamping methods to ensure that the workpiece is stable and secure.
Monitoring and Measuring Cutting Force
To adjust the cutting force effectively, we need to monitor and measure it during the machining process. There are several methods available for measuring the cutting force, such as using dynamometers. A dynamometer can measure the cutting force in three directions (tangential, radial, and axial) and provide real - time data.
By monitoring the cutting force, we can detect any abnormal changes and make timely adjustments to the cutting parameters or the cutting tool. For example, if the cutting force suddenly increases, it may indicate that the tool is worn or the cutting parameters are not appropriate.
Conclusion
Adjusting the cutting force in CNC millings is a complex but essential task. By understanding the factors that influence the cutting force, adjusting the cutting parameters, selecting the right cutting tool, improving the cutting environment, and monitoring the cutting force, we can optimize the machining process and achieve high - quality results.
As a CNC Millings supplier, we are committed to providing our customers with the best products and technical support. If you are interested in our CNC millings or have any questions about adjusting the cutting force, please feel free to contact us for a procurement discussion. We look forward to working with you to improve your machining efficiency and quality.
References
- Trent, E. M., & Wright, P. K. (2000). Metal Cutting. Butterworth - Heinemann.
- Boothroyd, G., & Knight, W. A. (2006). Fundamentals of Machining and Machine Tools. Marcel Dekker.
Send Inquiry



